Filter
Top Products
OPERATION
Saber Operation Section 3-14
©2011 Alamo Group Inc.
OPERATION
Boom PRE-OPERATION Inspection
Mower ID#________________ Make ____________________
Date: ________________ Shift ____________________
Before conducting the inspection, make sure the tractor engine is off, all rotation has
stopped and the tractor is in park with the parking brake engaged. Make sure the
mower is resting on the ground or securely blocked up and all hydraulic pressure has
been relieved.
Operator’s Signature:
Table 1:
Item
Condition at Start
of Shift
Specific Comments
if not O.K.
The Operator’s Manual is in the tractor
All safety decals are in place and legible
The mounting frame bolts are in place and tight
The boom connection bolts & pins are tight
There are no cracks in boom
The hydraulic cylinders pins are tight
The hydraulic pump hose connections are tight
The hydraulic valve controls function properly
There are no leaking or damaged hoses
The hydraulic oil level is full
There is no evidence of hydraulic leaks
The blades are not chipped, cracked or bent
The blade bolts are tight
The deflectors are in place and in good condition
The boom shields are in place and in good condition
The skid shoes are in good condition and tight
There are no cracks or holes in boom deck
The hydraulic motor mounting bolts are tight
The boom head spindle housing is tight and lubricated
DO NOT OPERATE an UNSAFE TRACTOR or MOWER