Filter
Top Products
MAINTENANCE
Saber Maintenance Section 4-16
©2011 Alamo Group Inc.
MAINTENANCE
DECK STOP ADJUSTMENT
Loosen locking nut. Turn adjustment bolt in, and run
deck cylinder out to full extension. Adjust bolt out
until the head just touches the boom, and tighten
lock nut. NOTE: Bolt should not hit boom before
cylinder reaches full travel.
GREASING SPINDLE
Locate grease fitting on inside of deck housing. Inject Tiger Spindle Lubricant, part number 06540000 into
spindle housing. Fill with lubricant until lubricant weeps out of top spindle seal. Lubricate spindle weekly or
every 40 hours of use.