Filter
Top Products
T6000 Saber Assembly Section 2-17
ASSEMBLY
Arrange the hoses in the clamp that attaches to the main frame as shown above,
with the 1” motor hoses closest to the main frame. Pull the hoses snug from the
swivel to the main frame clamps, when main boom is fully forward, and tighten the
hoses in the clamp.
Make sure the 1” motor hoses do not kink as the boom arm is moved into the
stowing position. If this happens the motor hoses will have to be tightened, because
there is too much hose between clamps.