Filter
Top Products
TP-5695 12/93 Specifications 1-5
Accessories
Several accessories are available to finalize the
installation or to add convenience to operation and
service. All the most current information can be obtained
by contacting the local authorized Kohler
dealer/distributor. Available accessories at the time of
print of this publication are as follows.
Sound Shield
(Optional on 3.5CFZ/4CZ;
Standard on 5CFZ/6.5CZ)
Provides for highly effective silencing, ease of access
for engine/generator servicing, low maintenance,
excellent durability, and safety.
Seawater Strainer
The seawater strainer with clear viewing container,
allows easy cleaning and maintenance. Threaded for
1/2 NPT fittings.
Ship-to-Shore Transfer Switch
The ship-to-shore transfer switch allows immediate
switching to generator set power or shore power
protecting the electrical system from the possibility of
simultaneous connection of both power sources.
Remote Start Panel
Allows starting/stopping from a location remote of the
generator set. Supplied with 15 foot (4.6 m) connection
harness. Overall mounting dimensions are 4 1/16 in.
(103 mm) by 2 1/8 in. (54 mm) with a minimum mounting
depth of 2 1/4 in. (57 mm).
Sender Kit
Provides gauge senders for the remote start and
two-meter panel kit and the remote start and four-meter
panel kit. The gauge sender kit is required to make the
oil pressure and water temperature gauges functional.
Circuit Breakers
See price list or dealer/distributor for proper application
of circuit breakers.
Model Amps Poles
4CZ/3.5CFZ 18 2
4CZ/3.5CFZ 35 1
4CZ/3.5CFZ 20 1
6CZ/5CFZ 30 2
6CZ/5CFZ 55 1
6CZ/5CFZ 25 2
6CZ/5CFZ 20 1
Remote Start and
Four-Meter Panel Kit
Allows starting/stopping from a location remote of the
generator set. The illuminated meters/gauges include a
DC voltmeter, engine oil pressure gauge, water
temperature gauge, and an hourmeter which records
total generator set operating hours. Overall dimensions
are 9 in. (229 mm) by 6 in. (152 mm) with a minimum
mounting depth of 4 in. (102 mm). Requires remote
connection/extension harness and sender kit.
Remote Start and
Two-Meter Panel Kit
Allows starting/stopping from a location remote of the
generator set. The illuminated gauges include engine oil
pressure gauge and water temperature gauge. Overall
dimensions are 6 in. (152 mm) by 6 in. (152 mm) with a
minimum mounting depth of 2 3/4 in. (70 mm). Requires
remote connection/extension harness and sender kit.
Remote Connection/
Extension Harness
Provides additional wiring between all remote panels
and controller connector. One required for each remote
meter panel kit. Available in 15 ft. (46 m) and 25 ft.
(76 m) lengths. Extension limited to a total of four kits
and 75 ft. (23 m).
12-Inch Remote Wiring Harness
This one foot (0.3 m) wiring harness has a 6-pin
connector on one end which is keyed to controller box
connector. The other end has pigtails for connection to
customer-supplied start switch, generator “on” light,
hourmeter, etc.
Siphon Break
Prevents the siphoning of water into the engine on
generator sets installed below the waterline.