Filter
Top Products
8
EQUIPMENT REQUIRED
The equipment required for installing the Orion Mobile Radio is listed
below:
• Crimping Tool for fuse holder
• Electric drill for drilling mounting holes
• Drills and circle cutters as follows:
No. 31 (1/8-inch) drill
No. 27 (9/64-inch) drill
5/8-inch drill or circle cutter
3/4-inch circle cutter, hole saw or socket punch
• Phillips and flat-blade screwdrivers
• POZIDRIV driver
• No. 20 Torx driver
Torx is a registered trademark of CAMCAR Division TEXTRON, Inc.
POZIDRIV is a registered trademark of Phillips International Company.
CAUTION
• Be careful to avoid damaging some vital part (fuel tank,
transmission housing, etc.) of the vehicle when drilling mounting
holes. Always check to see how far the mounting screws will
extend below the mounting surface before installing.
• If pilot holes must be drilled, remove all metal shavings from
drilling holes before installing screws.