Black Box Outlet Managed PDU Multi-tool User Manual


  Open as PDF
of 193
 
CHAPTER 5: Configuration
81
• Service Access: Determines whether members of this LDAP group will be
allowed to access command mode via the serial Setup Port, via Telnet/SSH or
via both methods. (Default = Serial Port = On, Telnet/SSH = On.
• Current/Power Metering: Determines whether or not members of this LDAP
Group will be allowed to view current, voltage and temperature readings.
Note:
After you have defined LDAP Group parameters, make certain to
save changes before proceeding. In the Web Browser Interface,
click on the "Add LDAP Group" button to save parameters; in the
Text Interface, press the [Esc] key several times until the Outlet
Managed PDU displays the "Saving Configuration" message.
5.9.8.2 Viewing LDAP Groups
If you need to examine an existing LDAP group denition, the "View LDAP Groups"
function can be used to review the group’s parameters and Plug Access Settings.
5.9.8.3. Modifying LDAP Groups
If you want to modify an existing LDAP Group in order to change parameters or
plug access rights, the "Modify LDAP Group" function can be used to recongure
group parameters. To Modify an existing LDAP Group, you must access the
Outlet Managed PDU command mode using a password that permits access to
Administrator Level commands. Once you have accessed the Modify LDAP Group
menu, use the menu options to redene parameters in the same manner that is used
for the Add LDAP Group menu, as discussed in Section 5.9.8.1.
Note:
After you have finished modifying LDAP Group parameters,
make certain to save the changes before proceeding. In the Web
Browser Interface, click on the "Modify LDAP Group" button to save
parameters; in the Text Interface, press the [Esc] key several times
until the Outlet Managed PDU displays the "Saving Configuration"
message and the cursor returns to the command prompt.
5.9.8.4. Deleting LDAP Groups
The Delete LDAP Group function is used to delete LDAP Groups that are no
longer in use. In order to Delete an existing LDAP Group, you must access the
Outlet Managed PDU command mode using a password that permits access to
Administrator Level commands.
 previous next