Filter
Top Products
OUTLET MANAGED PDU
182
/OFF Switch Plug(s) OFF
Switches selected plugs(s) or Plug Group(s) Off, as described in Section 9.2.2.
When the /OFF command is used to switch more than one plug, Boot/Sequence
Delay Period will be applied as described in Section 5.7. The /OFF command can
also be entered as /OF.
Note:
When this command is invoked in Administrator Mode or SuperUser
Mode, it can be applied to all Outlet Managed PDU plugs and Plug
Groups. When invoked in User Mode, the command can only be
applied to the plugs and/or Plug Groups that are enabled for
the account.
Availability: Administrator, SuperUser, User
Format: /OFF <s>[,Y] [Enter] or /OF <s>[,Y] [Enter]
Where:
s The number or name of the plug(s) or Plug Group(s) that you intend to
Switch Off. To apply the command to several plugs, enter a plus
sign (+) between each plug number. To apply the command to a range
of plugs, enter the numbers for the rst and last plugs in the range,
separated by a colon character (:). To apply the command to all plugs
allowed by your account, enter an asterisk character (*).
,Y (Optional) Suppresses the command conrmation prompt.
Example:
Assume that your account allows access to Plug A2 and Plug A3. To switch Plugs
A2 and A3 on your local Outlet Managed PDU Off, without displaying the optional
command conrmation prompt, invoke either of the following command lines:
/OFF A2+A3,Y [Enter] or /OF A2+A3,Y [Enter]