ENGINE 3-27
INSPECTION
• Inspect the reed valve for the carbon deposit.
• If the carbon deposit is found in the reed valve, replace the
PAIR reed valve with a new one.
CRANKCASE BREATHER REED VALVE
REMOVAL
• Remove the crankcase breather reed valve 1 from the crank-
case breather cover.
INSPECTION
• Inspect the reed valve for the carbon deposit.
• If the carbon deposit is found in the reed valve, replace the
crankcase breather reed valve with a new one.
INSTALLATION
• Install the reed valve to the breather cover.
• Tighten the bolts to the specified torque.
Crankcase breather reed valve cover bolt:
10 N·m (1.0 kgf-m, 7.0 lb-ft)
PCV HOSE
• Remove the PCV hose from the crankcase breather reed
valve cover.
• Inspect the PCV hose for wear or damage.
• If it is worn or damaged, replace the PCV hose with a new
one.
