A SERVICE OF

logo

3-54 ENGINE
Inspect the driveshaft left bearing dust seal for wear and dam-
age.
Replace the dust seal if there is anything unusual.
Removal
Remove the gearshift cam bearing with the special tools.
09923-74511: Bearing remover
09930-30104: Sliding shaft
Remove the oil seal. (LH only)
Remove the gearshift shaft bearings with the special tool.
09921-20240: Bearing remover set (15 mm)
Remove the bearing with the special tool.
09913-70210: Bearing installer set (62)
Be careful not to lean the bearing remover.