A SERVICE OF

logo

Open as PDF
next previous
3-74 ENGINE
• Insert the right and left thrust bearings with oil groove B fac-
ing the crank web.
NOTE:
Right thrust bearing has green painting.
COUNTERSHAFT
• Install the C-ring 1 and bearing pin 2 to the upper crank-
case.
• Install the countershaft assembly to the upper crankcase.
NOTE:
Align the C-ring with the groove of bearing and the bearing pin
with the indent on the bearing.
• Turn the bearing to fit the bearing dowel pin in the position A.
• Install the dowel pin and oil seal 3.
• Install the gearshift shaft and fork 4, bushing 5 and retainer
6.