A SERVICE OF

logo

7-6 COOLING AND LUBRICATION SYSTEM
COOLING FAN
REMOVAL
(7-4)
INSPECTION
Remove the right under cowling. (8-5)
Disconnect the cooling fan coupler 1.
Test the cooling fan motor for load current with an ammeter
connected as shown in the illustration.
The voltmeter is for making sure that the battery 2 applies
12 V to the cooling fan motor 3. With the cooling fan motor
with electric motor fan running at full speed, the ammeter 4
should be indicating not 5 A and more.
• If the fan motor does not turn, replace the motor assembly
with a new one.
NOTE:
When making above test, it is not necessary to remove the cool-
ing fan.
INSTALLATION
(7-5)