A SERVICE OF

logo

CHASSIS 8-21
Remove the oil seal E with the special tool.
09913-50121: Oil seal remover
Remove the oil seal retainer F.
INSPECTION
INNER AND OUTER TUBES
Inspect the inner tube outer surface and outer tube inner sur-
face for scratches.
Inspect the “ANTI-FRICTION” metal surfaces for scratches.
If any defects are found, replace them with the new ones.
FORK SPRING
Measure the fork spring free length.
If it is shorter than the service limit, replace it with a new one.
Front fork spring free length A:
Service Limit: 241 mm (9.49 in)
The removed oil seal must be replaced with a new one.
Do not remove the “ANTI-FRICTION” metals, A and
B.