A SERVICE OF

logo

8-6 CHASSIS
SCREEN
REMOVAL
Remove the screen 1 by removing the screws.
INSTALLATION
Install two nuts (middle ones) as shown.
Install the window screen.
BODY COWLING
REMOVAL
Remove the left and right under cowlings. (8-5)
Remove the screen. (Above)
Remove the combination meter. (9- )
Disconnect the turn signal lead wire couplers 1.
Remove the rear view mirror/turn signal assemblies 2.
Remove the screws.
Disconnect the lead wire coupler 3 and remove wire clamp
4.
Remove the body cowling.
INSTALLATION
Install the body cowling in the reverse order of removal.
Refer to the turn signal cable routing. (10- )