A SERVICE OF

logo

ENGINE 3-9
Remove the engine mounting nut 2.
Remove the engine mounting thrust adjuster lock-nut 3 with
the special tool.
Loosen the engine mounting thrust adjuster 4 fully.
09940-14980: Engine mounting thrust adjuster
socket wrench
Remove the engine mounting nut 5.
Loosen the engine mounting thrust adjuster lock-nut 6 with
the special tool.
Loosen the engine mounting thrust adjuster 7 fully.
09940-14980: Engine mounting thrust adjuster
socket wrench
NOTE:
Do not remove the engine mounting bolts at this stage.
Remove the engine mounting bolts and gradually lower the
front side of the engine. Then, take off the drive chain from the
driveshaft.
Remove the engine assembly.