A SERVICE OF

logo

ENGINE 3-7
ENGINE SPROCKET AND GEARSHIFT LEVER
Disengage the gearshift lever 1.
Remove the engine sprocket cover 2.
Remove the clutch push rod 3.
Remove the speed sensor rotor 4.
Remove the engine sprocket nut 5 and the washer 6.
Remove the cotter pin. (For E-03, 28, 33)
Loosen the rear axle nut 7.
Loosen the chain adjuster lock-nuts 8.
Loosen the chain adjusters 9.
• Push the rear wheel forward and make sure that the drive
chain has enough slack.
Disengage the drive chain from the rear sprocket.