A SERVICE OF

logo

CHASSIS 8-41
REMOVAL
Remove the cotter pin. (For E-03, 28, 33)
Loosen the axle nut 1.
Remove the under cowling. (8-5)
Raise the rear wheel off the ground and support the motorcy-
cle with a jack or wooden block.
Remove the axle nut and draw out the rear axle.
Remove the rear wheel by disengaging the drive chain.
Remove the collar 2.
Remove the brake disc bolts 3.
Remove the brake disc 4.
Remove the collar 5.
Loosen the rear sprocket mounting bolts 6 and separate the
rear sprocket 7 from its mounting drum 8.
Draw out the rear sprocket mounting drum 8 from the wheel
hub.
Remove the rear sprocket mounting drum retainer 9.
Do not operate the brake pedal with the rear wheel
removed.