A SERVICE OF

logo

CHASSIS 8-3
EXTERIOR PARTS
FASTENER REMOVAL AND INSTALLATION
FASTENER (Type A)
Removal
Depress the head of fastener center piece 1.
Pull out the fastener a.
Installation
• Let the center piece stick out toward the head so that the
pawls 2 close.
Insert the fastener into the installation hole.
NOTE:
To prevent the pawl
2
from damage, insert the fastener all the
way into the installation hole.
Push in the head of center piece until it becomes flush with
the fastener outside face.
FASTENER (Type B)
Removal
• Pry up the head of fastener center piece 1 with a screw
driver.
Pull out the fastener a.