CHASSIS 8-79
CALIPER INSPECTION
BRAKE CALIPER AND BRAKE CALIPER PISTON
• Inspect the brake caliper cylinder wall for nicks, scratches and
other damage. If any damage is found, replace the caliper
with a new one.
• Inspect the brake caliper piston surface for any scratches and
other damage. If any damage is found, replace the caliper
with a new one.
BRAKE PAD SPRING BOOTS AND SPACER
• Inspect the brake pad spring for damage and excessive bend.
If any damage is found, replace the brake pad spring with a
new one.
• Inspect the boots and spacer for damage and wear. If any
damage is found, replace boot and spacer with new ones.
BRAKE DISC INSPECTION
• Inspect the rear brake disc in the same manner as the front
brake disc. (8-70)
Service Limit
Rear disc thickness: 4.5 mm (0.18 in)
Rear disc runout: 0.30 mm (0.012 in)
