A SERVICE OF

logo

Open as PDF
next previous
C2631M-C (7/09) 65
Accessing a Preset Tour Group
To access the “Preset tour group” dialog box:
1. On the DX8100 toolbar, click the Live button .
2. On the PTZ keypad, click the Set button and then click the Pgm button . The “Preset tour group” dialog box opens.
3. Select the preset tour (1-4) that you want to program from the drop-down box.
4. Do one of the following:
• To add presets to a tour, refer to Adding Presets to a Tour on page 66.
• To delete presets from a tour, refer to Deleting Presets from a Tour on page 67.
Figure 34. Preset Tour Dialog Box
ᕣ