236 C2631M-C (7/09)
1. Place the mouse pointer in the middle of a camera view panel.
2. Click the left mouse button, and then drag the mouse pointer in the direction you want to move the camera. Figure 208 illustrates the range
of motion possibilities for the on-screen PTZ control.
Figure 208. On-Screen PTZ Movement
3. Release the mouse button when you have moved the camera to the desired position.
4. To adjust camera lens features, click the plus (+) or minus (-) buttons next to each function on the keypad. Refer to Figure 209.
Figure 209. Web Client PTZ Lens Controls
PTZ Presets
A preset is a user-defined camera position using PTZ, and focus commands. A DX8100 Series HVR can address up to 128 PTZ presets (1-32).
Preset 95 is reserved for remote camera setup, and preset 99 is reserved for camera autoscan mode.
Only cameras that support positioning and programming using Pelco D, P, or Coaxitron protocols can use this feature.
NOTES: Observe the use of the button for presets, preset tours, and patterns as follows:
• To program or clear presets, preset tours, and patterns, the Set button must be engaged.
• To activate presets, tours, and patterns, the Set button must be disengaged.
ᕤ
