C2631M-C (7/09) 133
5. Click Apply.
Figure 105. Event-Relay Link Settings: Video-Loss Link Settings Section
Linking Cameras to Record in Response to Alarm Events
To link multiple cameras to record in response to a single alarm input:
1. On the DX8100 toolbar, click the Setup button . The Setup dialog box opens to the Camera page.
2. Click the Linking . The Linking page is displayed.
3. Click the Event-Recording Link Settings tab.
4. In the Alarm Record Link Settings section, do the following:
a. Select an Alarm channel from the Alarm Channel drop-down box.
b. Click the button for each camera you want to begin recording when the source alarm is triggered.
5. Click Apply.
Figure 106. Event-Recording Link Settings: Alarm Record Link Settings Section
Linking Cameras to Record in Response to ATM/POS Events
To link multiple cameras to record in response to an ATM/POS event:
1. On the DX8100 toolbar, click the Setup button . The Setup dialog box opens to the Camera page.
2. Click the Linking button . The Linking page is displayed.
3. Click the Event-Recording Link Settings tab.
4. In the ATM/POS Record Link Settings section, do the following:
a. Select an ATM/POS address from the ATM/POS address drop-down box.
b. Click the button for each camera you want to begin recording in response to an ATM/POS event.
4a
4
4a
