208 C2631M-C (7/09)
Table AS describes the components of a DX8100 Mobile Client network.
When using wireless networking to connect a mobile device to the DX8100, Pelco recommends using enterprise class access points,
transceivers, and switches. Wired networking infrastructure should comply with IEEE 802.3 Fast Ethernet standards. Wireless networking
infrastructure should comply with IEEE 802.11a, b, or g networking standards.
STARTING THE DX8100 MOBILE CLIENT
Before attempting to start the DX8100 Mobile Client application, make sure you have installed the Mobile Client software on your pocket
PC-compatible handheld device and you have an active network connection to a DX8100 HVR server.
To start the DX8100 Mobile Client application:
• From the Windows Start menu, choose Start > Programs > DX8100.
The DX8100 Mobile Client application starts.
Figure 161 shows the DX8100 Mobile Client application window.
Figure 161. Example: Main Screen_C2630M-C-0051
Table AS. Components of a DX8100 Mobile Client Network
Item Component
Ethernet switch
DX8100 server HVR
Mobile client
Wireless access point
