C2631M-C (7/09) 39
Starting an Automatic Cycle View Mode
To start the automatic cycle view mode:
• On the DX8100 toolbar, click the Cycle Views button .
The Cycle Views icon turns blue, indicating that the DX8100 is in the automatic cycle view mode. The system will cycle through each panel,
displaying each panel for the configured cycle view dwell time.
Viewing Analog and IP Camera Video in the Automatic Cycle View Mode
1. On the DX8100 toolbar, click the Single division button .
2. In the Site Tree, click and drag the site icon onto the single view pane. All of the cameras in the site are assigned to view panes.
3. On the DX8100 toolbar, click the Cycle Views button .
Stopping an Automatic Cycle View Sequence
To stop the automatic cycle view mode:
• On the DX8100 toolbar, click the Cycle Views button .
The DX8100 stops the automatic cycle view mode.
Selecting User Groups to Set the Cycle View Dwell Time
The DX8100 allows the Administrator to control which user group can change the cycle view dwell time. In this case, anyone that belongs to a
selected user group can change the cycle view dwell time.
To select a user group to have permission to change the cycle view dwell time:
1. On the DX8100 toolbar, click the Live button .
2. From the DX8100 menu bar, choose View > Cycle Views Setup > Dwell time change.
3. From the Dwell time change submenu, choose a user group.
Selecting the Cycle View Dwell Time
To configure the cycle period:
1. On the DX8100 toolbar, click the Live button .
2. From the DX8100 menu bar, choose View > Cycle Views Setup > Dwell time.
3. From the Dwell time submenu, choose a time period
