C2631M-C (7/09) 181
ACCESSING THE EMERGENCY E-MAIL NOTIFICATION SETUP
To access the emergency e-mail notification setup:
1. On the DX8100 toolbar, click the Setup button . The Setup dialog box opens to the Camera page.
2. Click the Notification button . The Notification page is displayed.
3. Click the Emergency E-mail Notification Setup tab.
CONFIGURING EMERGENCY E-MAIL NOTIFICATION
This section describes how to set up emergency e-mail notification and includes the following topics:
• Enabling or Disabling E-mail Notification
• Setting Up the E-mail Server
• Testing E-mail Notification on page 182
Enabling or Disabling E-mail Notification
To enable or disable emergency e-mail notification:
1. On the DX8100 toolbar, click the Setup button . The Setup dialog box opens to the Camera page.
2. Click the Notification button . The Notification page is displayed.
3. Click the Emergency E-mail Notification Setup tab.
4. In the Emergency E-mail Notification page, do one of the following:
• Click the Enable Notification button to enable e-mail notification.
• Click the Disable Notification button to disable e-mail notification.
Setting Up the E-mail Server
Set up the e-mail server in the Emergency E-Mail Notification page. For information about accessing the Emergency E-Mail Notification page,
refer Accessing the Emergency E-mail Notification Setup on page 181.
To set up the e-mail server:
1. On the DX8100 toolbar, click the Setup button . The Setup dialog box opens to the Camera page.
2. Click the Notification button . The Notification page is displayed.
3. Click the Emergency E-mail Notification Setup tab.
4. Enter a name in the Full Name box. You should enter a name that reflects the DX8100 server sending the notification (for example, DX8100
First Floor Lobby). Names can be up to 31 characters long and can include spaces. but not special characters.
5. Enter your e-mail address in the E-mail Address box.
6. Enter the address of your local SMTP mail server. Obtain this information from your network administrator.
7. If your e-mail server requires you to log in, do the following:
a. Select the check box labeled My E-mail Server Requires Authentication.
b. Enter your e-mail server address.
c. Enter your user name. (User names can be up to 31 characters in length and cannot include spaces or special characters.)
d. Enter your password. (Passwords can be up to 19 characters in length and cannot include spaces or special characters.)
