162 C2631M-C (7/09)
Configuring Advanced ATM/POS-Activated Relay Output
To configure an ATM/POS-activated relay output:
1. On the DX8100 toolbar, click the Setup button . The Setup dialog box opens to the Camera page.
2. In the Setup dialog box, click Schedule button . The Schedule page is displayed.
3. Click the Configure Relays button. The Configure Relays dialog box opens.
4. Click the ATM/POS tab if it is not already selected.
5. Configure each relay that is linked to an ATM/POS:
a. Click the drop-down box to select a relay.
b. Select a relay time value from the Activation Period drop-down box.
Figure 133. Linking Relays to ATM/POS
Table AL describes the available ATM/POS-activated relay options.
Table AL. ATM/POS-Activated Relay Settings
Option Result
Disable Relay will not activate when the ATM/POS event occurs.
Follow Event Relay will activate at the exact moment the ATM/POS event occurs.
1, 3, 5, 10, 15, and 20 Seconds Sets the amount of time the relay will remain active after the ATM/POS event occurs.
ᕤ
5a
