60 C2631M-C (7/09)
6. Move the camera through a series of movements using the on-screen PTZ and focus controls.
Figure 27. Programming a Pattern
Stop Programming a Pattern
To stop programming a pattern:
1. On the PTZ keypad, click the Pattern button .
2. Click the Set button .
ACTIVATING A PATTERN
When activated, a pattern will repeat indefinitely until it is cleared, another pattern is set, or the on-screen PTZ control is moved.
To activate a pattern:
1. On the PTZ keypad, click a pattern number (1-4) on the keypad.
2. Click the Pattern button .
Figure 28. Activating a Pattern
CLEARING A PATTERN
To clear a pattern:
1. On the PTZ keypad, click Set button to enter programming mode.
2. Select a pattern number (1-4) on the keypad.
3. Click the Pattern button .
4. Click the Clr button .
5. Click the Pattern again.
ᕤ
ᕥ
ᕣ
ᕡ
ᕢ
