B-2 HP J4100A 10/100Base-TX Print Server
Link Configuration Jumper Settings
The HP J4100A JetDirect 10/100Base-TX card provides link
configuration jumpers that may be manually set if autonegotiation
is not able to connect the card to the network. You can set the link
operation for 100 Mbps Full Duplex, 100 Mbps Half Duplex, or
10 Mbps Half Duplex. (Note that reconfiguration of the hub or
switch port may also be required.)
For jumper setting definitions, refer to the following illustration.
Jumper
P4
Jumper
P3
Jumper
P2
Description
Auto -- -- Default setting. JetDirect
autonegotiates link speed and
duplex mode
Man Half 100 JetDirect is manually set for 100
Mbps, Half-duplex
Man Half 10 JetDirect is manually set for 10 Mbps,
Half-duplex
Man Full 100 JetDirect is manually set for 100
Mbps, Full-duplex
Man Full 10 JetDirect is manually set for 10 Mbps,
Full-duplex
Link
Configuration
jumpers
