4-6 Control Panel for Large-Format Printers
Configuring Novell NetWare Frame Types
You can set the NetWare frame types if the NetWare protocol is
enabled (
NETWORK=NOVELL→
or
NETWORK=AUTO→
was displayed
on your control panel). You can configure one of the following frame-
type settings:
Novell NetWare Frame Types
on an HP JetDirect Ethernet Card
Novell NetWare Frame Types
on an HP JetDirect Token Ring Card
Frame Type Description
AUTO (default) Automatically senses and limits the frame type to the one
detected.
EN_8023 Limit frame types to IPX over IEEE 802.3 frames. All others
will be counted and discarded.
EN_II Limit frame types to IPX over Ethernet frames. All others
will be counted and discarded.
EN_8022 Limit frame types to IPX over IEEE 802.2 with IEEE 802.3
frames. All others will be counted and discarded.
EN_SNAP Limit frame types to IPX over SNAP with IEEE 802.3
frames. All others will be counted and discarded.
Frame Type Description
AUTO (default) Automatically senses and limits the frame type to the
one detected.
TR_8022 Limit frame types to IPX over IEEE 802.2 LLC with IEEE
802.5 frames. All others will be counted and discarded.
TR_SNAP Limit frame types to IPX over SNAP with IEEE 802.5
frames. All others will be counted and discarded.
