A SERVICE OF

logo

Using the Control Panel for Printers 3-13
3
Printer Control
Panel
4. Change the message to
CFG NETWORK=YES*
using the following
buttons:
5. Press
[Item]
until
CFG ETALK=NO*
appears.
6. Change this to
CFG ETALK=YES*
by pressing
[+]
, and then
pressing
[Select]
or
[Enter]
depending on your printer model.
7. Press
[Item]
.
ETALK PHASE=1*
or
ETALK PHASE=2*
appears
on the control panel.
The asterisk (
*
) indicates the active phase setting.
To change the phase setting, press
[+]
until the phase setting
that you desire appears, then press
[Select]
or
[Enter]
depending on your printer model. Be sure
*
appears
alongside your selection.
8. To activate the printer and save your changes, press
[On Line]
(for LaserJet 5 Series printers, press
[Go]
).
To complete the print server configuration, see the HP JetDirect
software installation guide
included with the product.
5 Series and 5Si Series printers Press
[+]
, then
[Select]
Other printers Press
[+]
, then
[Enter]