A SERVICE OF

logo

2-14 Installing the HP JetDirect Print Server Card
3. If the slot has a cover plate, remove it.
4. Insert the card. Align the card with the guide rails in the
printer.
5. Press the card into the slot until firmly seated and tighten each
thumbscrew a little at a time, alternating between each side
until both screws are secure.
6. Connect the network cable to the card.
7. Connect the power cord and turn on the printer.
NOTE
For the HP J4100A JetDirect card (RJ-45 and
BNC), you can connect to
one
of the Ethernet ports
(only one Ethernet port is active at a time).
For the HP J4105A JetDirect card (RJ-45 and DB9),
you can connect to
only one
Token Ring port.
Components face left for Color LaserJets
(including 5/5M)