3-8 Using the Control Panel for Printers
3. Press
[Item]
until
CFG NETWORK=NO*
appears.
4. Change the message to
CFG NETWORK=YES*
using the following
buttons:
5. Press
[Item]
until
CFG IPX/SPX=NO*
appears.
6. Change this to
CFG IPX/SPX=YES*
by pressing
[+]
, and then
pressing
[Select]
or
[Enter]
depending on your printer model.
7. Press
[Item]
until
SRC RT=<Source Routing>*
appears.
• The asterisk (
*
) indicates the active source-routing selection.
• To change source routing, press
[+]
until the source routing
that you desire appears, then press
[Select]
or
[Enter]
depending on your printer model. Be sure “
*
” appears
alongside your selection.
8. To activate the printer and save your changes, press
[On Line]
(for LaserJet 5 Series printers, press
[Go]
).
To complete the print server configuration, see the HP JetDirect
software installation guide
included with the product.
4Si Series printers (select the
card slot being configured)
MIO MENU 1
or
MIO MENU 2
5Si Series printers (select the
card slot being configured)
HP MIO 1 MENU
or
HP MIO 2 MENU
5 Series printers
HP MIO MENU
5 Series and 5Si Series printers Press
[+]
, then
[Select]
Other printers Press
[+]
, then
[Enter]
