The HP JetDirect Print Server Card 1-1
1
Introduction
1
The HP JetDirect Print Server Card
Introduction
The HP JetDirect print server is a card that is installed in the
modular input/output (MIO) slot of a printer and allows the printer
to be connected directly to a network instead of a single PC. When
you use an HP JetDirect print server, you can place your printer
anywhere on a network for use by multiple clients.
The HP JetDirect print server card must first be installed into the
printer and then be configured for network operation. To configure
the print server, you can use HP JetDirect software, or the printer’s
control panel for selected printers*.
This guide shows you how to perform the hardware installation for
the following printers:
• HP Color LaserJet*, and Color LaserJet 5 Series* (5, 5M)
• HP LaserJet 5Si Series* (5Si, 5Si MX, 5Si NX, 5Si Mopier)
• HP LaserJet 5 Series* (5, 5M, 5N)
• HP LaserJet 4Si Series* (4Si, 4Si MX)
• HP LaserJet 4 Plus Series* (4 Plus, 4M Plus)
• HP LaserJet 4 Series* (4, 4M)
• HP LaserJet 4V Series* (4V, 4MV)
• HP Professional Series* (2500C, 2500CM)
• HP DeskJet 1200C Series (1200C, 1200C/PS)
• HP DeskJet 1600C Series (1600C, 1600CM, 1600CN)
• HP CopyJet and CopyJet M color printer-copier
• HP DesignJet 600 Series* (600, 650C)
• HP DesignJet 700 Series* (700, 750C, 750C Plus, 755CM)
• HP DesignJet 2000CP, 2500CP, 3000CP, 3500CP Series*
• HP DesignJet ColorPro GA Series*
* Control panels for these printers allow you to configure some
network parameters manually (see chapters 3 and 4).
To set up network printing using the HP JetDirect software, refer
to the
HP JetDirect 400N Quick Setup Guide
included with this
product.
