Filter
Top Products
Syntax and Commands
AFG3000 Series Arbitrary/Function Generators Reference Manual 3-19
DISPlay:CONTrast
This command sets or queries the contrast of the LCD display.
Group
Display
Syntax
DISPlay:CONTrast {<contrast>|MINimum|MAXimum}
DISPlay:CONTrast? [MINimum|MAXimum]
Arguments
<contrast>::=<NR2>
where
<NR2> is a range of display contrast from 0 through 1. The larger the value, the
greater the screen contrast.
MINimum sets the display to the 0 contrast level.
MAXimum sets the display to the largest contrast level.
Returns
<NR2>
Examples
DISPlay:CONTrast MAXimum
sets the display contrast to the largest contrast level.
DISPlay:SAVer[:STATe]
This command sets or queries the screen saver setting of the LCD display. When
enabled, the screen saver function automatically starts if no operations are applied
to the instrument front panel for five minutes.
Group
Display
Syntax
DISPlay:SAVer[:STATe] {ON|OFF|<NR1>}
DISPlay:SAVer[:STATe]?
Arguments
ON or <NR1>≠0 enables the screen saver function.
OFF or <NR1>=0 disables the screen saver function.
Returns
<NR1>
Examples
DISPlay:SAVer:STATe OFF
disables the screen saver function.