Filter
Top Products
Reference
2-4 AFG3000 Series Arbitrary/Function Generators Reference Manual
Ramp Menu
Table 2-2 shows the Ramp menu.
Pulse Menu
Table 2-3 shows the Pulse menu.
Table 2-2: Ramp Menu
First Level Second Level Description
Ramp Parameter
Menu
Symmetry Sets the Ramp waveform symmetry to your
desired value.
Set to 0% Sets the Ramp waveform symmetry to 0%.
Set to 50% Sets the Ramp waveform symmetry to 50%.
Set to 100% Sets the Ramp waveform symmetry to 100%.
Frequency/Period/
Phase Menu
Refer to Table 2-1
Amplitude/Level Menu Refer to Table 2-1
Run Mode Menu Continuous –––
Modulation Refer to Table 2-6
Sweep Refer to Table 2-7
Burst Refer to Table 2-8
Output Menu Refer to Table 2-9
Table 2-3: Pulse Menu
First Level Second Level Description
Pulse Parameter
Menu
Duty Selects Duty as a parameter to be changed.
Width Selects Width as a parameter to be changed.
Leading Edge Selects Leading Edge as a parameter to be
changed.
Trailing Edge Selects Trailing Edge as a parameter to be
changed.
Frequency/Period/
Delay Menu
Frequency Selects Frequency as a parameter to be
changed.
Period Selects Period as a parameter to be changed.
Frequency (Period)
1
CH1=CH2
Off On
1. Dual-channel model only.
Toggles between Off and On to disable/enable
the function to set the CH1 and CH2 to the same
value.
Lead Delay Selects Lead Delay as a parameter to be
changed.
Recover
Lead Delay
1
Use to align the lead delay of two channel
signals.
Amplitude/Level Menu Refer to Table 2-1
Run Mode Menu Continuous –––
Modulation Refer to Table 2-6
Burst Refer to Table 2-8
Output Menu Refer to Table 2-9