Filter
Top Products
Syntax and Commands
3-44 AFG3000 Series Arbitrary/Function Generators Reference Manual
[SOURce[1|2]]:BURSt:TDELay
This command sets or queries delay time in the burst mode for the specified
channel. It specifies a time delay between the trigger and the signal output. This
command is available only in the Triggered burst mode.
Group
Source
Syntax
[SOURce[1|2]]:BURSt:TDELay {<delay>|MINimum|MAXimum}
[SOURce[1|2]]:BURSt:TDELay?{MINimum|MAXimum}
Arguments
<delay>::=<NRf>[<units>]
where
<units>::=[s | ms | µs | ns]
MINimum sets the delay time to minimum value.
MAXimum sets the delay time to maximum value.
Returns
<delay>
Examples
SOURce1:BURSt:DELay 20ms
sets the CH 1 delay time to 20 ms.