Filter
Top Products
Syntax and Commands
AFG3000 Series Arbitrary/Function Generators Reference Manual 3-105
TRIGger[:SEQuence]:SLOPe
This command sets or queries the slope of trigger signal.
Group
Trigger
Syntax
TRIGger[:SEQuence]:SLOPe {POSitive|NEGative}
TRIGger[:SEQuence]:SLOPe?
Arguments
POSitive indicates that the event occurs on the rising edge of the external trigger
signal.
NEGative indicates that the event occurs on the falling edge of the external trigger
signal.
Returns
POS|NEG
Examples
TRIGger:SEQuence:SLOPe POSitive
sets the trigger slope to positive, which triggers on the rising edge of the signal.
TRIGger[:SEQuence]:SOURce
This command sets or queries the trigger source for an external trigger signal.
Group
Trigger
Syntax
TRIGger[:SEQuence]:SOURce {TIMer|EXTernal}
TRIGger[:SEQuence]:SOURce?
Arguments
TIMer specifies an internal clock as the trigger source.
EXTernal specifies an external trigger input as the trigger source.
Returns
TIM|EXT
Examples
TRIGger:SEQuence:SOURce EXTernal
sets an external trigger input as the trigger source.