Filter
Top Products
6-25
LS 3070 Product Reference Guide: Programming
Parameter Menu Scanning
Beeper Sequence Indication
1 Beep - short high tone Correct entry scanned or correct menu sequence
performed.
1 Beep - lo/hi tone Input error, incorrect bar code or CANCEL
scanned, wrong entry, incorrect bar code
programming sequence; remain in program
mode.
1 Beep - hi/lo tone Keyboard parameter selected. Enter value using
bar code keypad.
1 Beep - hi/lo/hi/lo tone Successful program exit with change in the
parameter setting.
Code 39 Scan And Store
Beeper Sequence Indication
1 Beep - hi/lo tone New Code 39 data was entered into the buffer.
3 Beeps - long high tone Code 39 buffer is full.
1 Beep - lo/hi/lo tone The buffer was erased, or there was an attempt to
transmit an empty buffer. When the Code 39
buffer was empty, the base station read a
command to clear or to transmit a Code 39 buffer.
2 Beeps - long high tone Error in data transmission.
1 Beep - lo/hi tone A successful transmission of buffered data.