Filter
Top Products
7-46
LS 3070 Product Reference Guide: Programming
Data Transmission Formats
To select a data transmission format:
1. Scan the SCAN OPTIONS or MAGSTRIPE OPTIONS bar code.
2. Scan the bar code corresponding to the desired converted data format.
3. Scan ENTER.
4. If you make a mistake, scan CANCEL, or you wish to erase the last entered
format, or all formats, scan the appropriate bar code from page 7-52.
Note: RS-232C hosts will treat the extended keypad
default suffix (7013) as Enter.
SCAN OPTIONS
DATA AS IS
<PREFIX> <DATA>