Filter
Top Products
6-16
LS 3070 Product Reference Guide: Programming
Intercharacter Delay
Select the intercharacter delay option matching host device requirements. The
intercharacter delay gives the host system time to service its receiver and
perform other tasks between characters. Select from no delay to a 99 msec
delay between the transmission of each character.
Transmit Code ID Character
A code ID character identifies the code type of a scanned bar code. This may be
useful when the scanner is decoding more than one code type. If a prefix is
selected, the code ID character is sent after the prefix. Code ID characters are:
A = UPC-A, UPC-E, EAN-13, or EAN-8; B - Code 39; C = Codabar; D = Code
128; F = Interleaved 2 of 5; G = Discrete 2 of 5.
Transmit AIM ID Character
Enabling this parameter, with the Transmit Code ID Character parameter
enabled allows you to send the AIM code identifer in lieu of the Symbol
identifiers listed above. The identifier will be sent as a three character prefix, in
accordance with AIM specifications for symbology identifiers. See AIM’s
Guidelines on Symbology Identifiers for full details.
Ignore Unknown Characters
When enabled, all data is sent except for unknown characters, and no error
beeps are sounded. Unknown characters are those characters the selected
terminal does not recognize.
When disabled, all data containing one or more unknown characters is
discarded, and error beeps are sounded.
OCIA Clock Polarity
Selects the appropriate clock edge values so that a host terminal with non-
standard OCIA format can recognize the clock signal phase synchronized with
data.