Linear DVS-2400 Pressure Washer User Manual


 
Black 0006
Black0006
2. SECURITY SYSTEM FLOOR PLAN
EXAMPLE SYSTEM
The example shows a typical DVS-2400 system.
Any or all of the accessories shown can be used.
A total of 24 sensors (including keypads) can be
used with each Console.
DESIGN THE INSTALLATION
Create a floor plan of the installation.
Consider the security needs of the premises.
Determine which doors and windows are
vulnerable to intrusion.
Figure which interior areas an intruder might go
to if unlawful entrance is gained.
Indicate locations for door/window sensors,
interior motion detectors, keypads, glass break
detectors and external siren speakers.
Decide on a centralized location for the security
Console.
CON
S
GARAGE
S
S
MS
S
MD
ES
WK
S
S
S
MD
MS
S
S
MS
CON - CONSOLE
S - DOOR/WINDOW SENSOR
WK - WIRELESS KEYPAD
MD - MOTION DETECTOR
ES - EXTERNAL SIREN
SD - SMOKE DETECTOR
GB - GLASS BREAK SENSOR
MS - EXTERNAL MAGNETIC SWITCH
LIVING
DINING
KITCHEN
ENTRY
BED
BATH
DEN
GB
SD
GB
BED
NOTE: IN NEW CONSTRUCTION, NFPA 71 REQUIRES A
SMOKE DETECTOR LOCATED INSIDE EACH BEDROOM
AS WELL AS A SMOKE DETECTOR ON EACH LEVEL.
Example Residential Security System Floor Plan
4