Filter
Top Products
Black 0028
Black0028
CHANGING A SENSORS SUPERVISION
◆
When a sensor is programmed, the Console sets
all stationary sensors as supervised, and all
portable sensors as non-supervised.
◆
The Console expects hourly status transmissions
from any sensor programmed as supervised.
◆
Any sensor can be programmed as supervised
or non-supervised.
✍
NOTE: Don’t program a sensor that doesn’t send
status transmissions as supervised.
CHANGING A SENSORS RESTORE REQUIREMENTS
◆
When a sensor is programmed, the Console
automatically recognizes it as manually or
automatically restoring.
◆
The Console expects restoral signals from any
sensor programmed as manual restore.
◆
Any sensor can be programmed as manual or
automatic restore.
✍
NOTE: Don’t program a sensor that doesn’t send
restoral transmissions as manual restore.
ENTRY DELAY TIME
◆
The factory-set Entry Delay time is 30 seconds.
◆
The Entry Delay time can be adjusted from 20 to
255 seconds.
✍
NOTE: Don’t make the Entry Delay too short. The
user may not have enough time to disarm the
system before an alarm.
Write the new Entry Delay time in the User’s
Guide.
EXIT DELAY TIME
◆
The factory-set Exit Delay time is 60 seconds.
◆
The Exit Delay time can be adjusted from 20 to
255 seconds.
Write the new Exit Delay time in the User’s Guide.
BURGLARY SIREN TIME
◆
The factory-set burglary siren time is five
minutes.
◆
The burglary siren time can be adjusted from
one to 30 minutes.
EMERGENCY SIREN TIME
◆
The factory-set emergency siren time is five
minutes.
◆
The emergency siren time can be adjusted from
one to 30 minutes.
HOME
AWAY
16 FOR NON-SUPERVISED
17 FOR SUPERVISED
SENSOR NUMBER
TO CHANGE
PROGRAM
STORE PROGRAM
HOME
AWAY
18 FOR MANUAL RESTORE
19 FOR AUTO RESTORE
SENSOR NUMBER
TO CHANGE
PROGRAM
STORE PROGRAM
JKL
TIME IN SECONDS (20-255)
PROGRAMMING STEP #25
PROGRAM
STORE PROGRAM
AW AY
TIME IN SECONDS (20-255)
PROGRAMMING STEP #26
PROGRAM
STORE PROGRAM
3
DEF
0
HOME
AWAY
TIME IN MINUTES (1-30)
PROGRAMMING STEP #30
PROGRAM
STORE PROGRAM
3
DEF
1
HOME
AWAY
TIME IN MINUTES (1-30)
PROGRAMMING STEP #31
PROGRAM
STORE PROGRAM
26