Linear DVS-2400 Pressure Washer User Manual


 
Black 0032
Black0032
AUTOMATION OUTPUT WHILE ARMED
The factory setting causes the Console’s
Automation Output to activate when pressing
the [
(A)
] key, or when it’s triggered with a
two-button remote control.
In addition, the Console can be programmed to
activate the Automation Output when the system
is armed.
AUTOMATION OUTPUT DURING EXIT/ENTRY DELAYS
The factory setting causes the Console’s
Automation Output to activate when pressing
the [
(A)
] key, or when it’s triggered with a
two-button remote control.
In addition, the Console can be programmed to
activate the Automation Output during the exit
and Entry Delays.
AUTOMATION OUTPUT POLARITY
The factory setting causes the Console’s
Automation Output to provide a current limited
voltage source when activated.
Alternately, the Console can be programmed so
the Automation Output provides a current
limited voltage source when
deactivated
.
REMOTE ACCESS PASSWORD
This is the password used to gain access to the
Console when using the RA-2400 remote access
software.
The password must be 6-digits long.
Log the remote access password in the box below.
REMOTE ACCESS PASSWORD
DURESS CODE
The duress code will disarm the system, without
any special indications or sounds, but will send the
programmed duress code to the Central Station.
The duress code should be
two or more digits
different than any user code.
Log the duress code in the box below.
DURESS CODE
MASTER USER CODE
The master user code is 1234 when power is first
applied to the Console.
The master user code can be changed through
programming to any 1-5 digit code. Only the
master user can access Setup Mode, restricted
users cannot.
NOTE: For maximum security, a 3-5 digit code is
recommended.
Log the master user code in the box below.
MASTER USER CODE
7
PRS
3
DEF
HOME
AWAY
PROGRAMMING STEP #73
PROGRAM
STORE PROGRAM
0 FOR STANDARD TRIGGER
1 FOR OUTPUT WHEN ARMED
7
PRS
4
GHI
HOME
AWAY
PROGRAMMING STEP #74
PROGRAM
STORE PROGRAM
0 FOR STANDARD TRIGGER
1 FOR OUTPUT DURING
EXIT/ENTRY DELAYS
7
PRS
5
JKL
HOME
AWAY
PROGRAMMING STEP #75
PROGRAM
STORE PROGRAM
0 FOR VOLTAGE WHEN OFF
1 FOR VOLTAGE WHEN ON
8
TUV
7
PRS
HOME
AWAY
PROGRAMMING STEP #87
PROGRAM
STORE PROGRAM
6-DIGIT REMOTE
ACCESS PASSWORD
9
WXY
9
WXY
HOME
AWAY
PROGRAMMING STEP #99
PROGRAM
STORE PROGRAM
1-5 DIGIT MASTER CODE
(3-5 DIGITS RECOMMENDED)
9
WXY
2
ABC
HOME
AWAY
PROGRAMMING STEP #92
PROGRAM
STORE PROGRAM
1-5 DIGIT DURESS CODE
(3-5 DIGITS RECOMMENDED)
30