Linear DVS-2400 Pressure Washer User Manual


 
Black 0023
Black0023
10. SYSTEM TROUBLE INDICATIONS
The DVS-2400 Console is a self-monitoring
supervised wireless system.
If the Console detects a problem with any of the
supervised system sensors or backup battery, it
will display the appropriate trouble indication
and, if monitored, report the trouble to the
Central Station through the communicator
(depending on communicator programming).
CONSOLE LOW BATTERY
The Console constantly charges and monitors
the optional backup battery (if installed).
If the backup battery condition is abnormal, the
Console’s POWER light will indicate the trouble.
The POWER indicator normally glows when AC
power is on.
With a charged backup battery installed, if the
Console looses AC power, the POWER indicator
will dim as the Console runs on the backup battery.
If the backup battery is low, recharging, or not
installed, the POWER indicator blinks when AC
power is present.
If the AC power is off and no backup battery is
installed, the POWER indicator will be off (in this
case the system has no power and is disabled).
Normal battery life for the type of backup battery
used in the Console is 3-4 years. If the battery
does not take a charge in 72 hours, it should be
replaced.
SENSOR LOW BATTERIES
When the BATTERIES indicator on the Console
blinks, one or more sensors have a low battery.
Press [
] key for one second to view sensor
status. Sensor status indicator for any sensor
with a low battery will light along with the
BATTERIES indicator.
Replace the sensor’s battery as described in their
instructions.
Switch to Test Mode after replacing the sensor
battery and completely test the system (see Test
Mode). Switching to Test Mode clears the low
battery indication.
SENSOR RADIO TROUBLE
When the TROUBLE indicator blinks, one or
more sensors have not reported status during the
eight hour status time window.
Press [
] key for one second to view sensor
status. Sensor status indicator for any sensor that
has not reported in will light along with the
TROUBLE indicator.
Switch to Test Mode after servicing the sensor
and completely test the system (see Test Mode).
Switching to Test Mode clears the trouble
indication.
POWER INDICATOR
ON WITH AC POWER AND
CHARGED BACKUP BATTERY
BLINKS WITH LOW,
RECHARGING OR MISSING
BACKUP BATTERY
DIM WHEN AC POWER IS
ABSENT AND CONSOLE IS
RUNNING ON BACKUP BATTERY
BATTERIES INDICATOR
BLINKS WHEN ONE OR MORE
SENSORS HAVE A LOW
BATTERY
LIGHTS WITH SENSOR
INDICATOR DURING LOW
BATTERY STATUS CHECK
(PRESS FOR 1 SECOND)
TROUBLE INDICATOR
BLINKS WHEN ONE OR MORE
SENSORS HAVE NOT
REPORTED STATUS DURING
THE EIGHT HOUR STATUS TIME
WINDOW
LIGHTS WITH SENSOR
INDICATOR DURING
TRANSMITTER STATUS CHECK
(PRESS FOR 1 SECOND)
21