Linear DVS-2400 Pressure Washer User Manual


 
Black 0030
Black0030
SILENT BURGLARY ALARMS
The factory setting causes audible burglary
alarms.
Alternately, the Console can be programmed for
silent burglary alarms.
SILENT EMERGENCY ALARMS
The factory setting causes audible emergency
alarms.
Alternately, the Console can be programmed for
silent emergency alarms.
DISABLING QUICK ARMING
The factory setting allows the Console to be
armed by holding down the mode keys for two
seconds.
Alternately, the Console can be programmed to
not allow quick arming.
If quick arming is disabled, a user code
must
be
entered before pressing the mode buttons.
NOTE: For commercial installations, it is
recommended to disable quick arming to prevent
customers from arming the system.
NOTE: If quick arming is disabled the Home
Instant Mode is unavailable.
AUTOMATIC RESTORAL OF BYPASSED SENSORS
Bypassed sensors are ignored by the Console
and cannot cause an alarm.
The factory setting causes the Console to
automatically restore any bypassed sensor when
the sensor closes. After it’s restored, the sensor
is ready to cause an alarm the next time it is
opened.
Alternately, the Console can be programmed to
not automatically restore (remove the bypass
from) sensors that close. Bypassed sensors will
remain bypassed until the system is disarmed.
AUTOMATIC BYPASSING OF OPEN SENSORS
The factory setting requires the user to manually
bypass any open sensors when the system is
armed.
If arming is attempted with open sensors, the
Console will sound five two-tone beeps and will
not arm.
Arming to the same mode again within five
seconds will bypass any open sensors and arm
the Console.
Alternately, the Console can be programmed to
automatically bypass any open sensors when the
system is armed.
6
MNO
3
DEF
HOME
AWAY
PROGRAMMING STEP #63
PROGRAM
STORE PROGRAM
0 FOR AUDIBLE BURGLAR
1 FOR SILENT BURGLAR
6
MNO
4
GHI
HOME
AWAY
PROGRAMMING STEP #64
PROGRAM
STORE PROGRAM
0 FOR AUDIBLE EMERGENCY
1 FOR SILENT EMERGENCY
6
MNO
5
JKL
HOME
AWAY
PROGRAMMING STEP #65
PROGRAM
STORE PROGRAM
0 FOR QUICK ARMING OFF
1 FOR QUICK ARMING ON
6
MNO
6
MNO
HOME
AWAY
PROGRAMMING STEP #66
PROGRAM
STORE PROGRAM
0 FOR AUTO RESTORAL OFF
1 FOR AUTO RESTORAL ON
6
MNO
7
PRS
HOME
AWAY
PROGRAMMING STEP #67
PROGRAM
STORE PROGRAM
0 FOR AUTO BYPASS OFF
1 FOR AUTO BYPASS ON
28