Filter
Top Products
Black 0036
Black0036
CALL LIMITER
◆
The factory setting for the call limiter is OFF.
This allows the communicator to report burglary
alarms, once for each sensor, as many times as
they are triggered.
◆
Optionally, the Console can be programmed to
only allow five burglary reports total per arming
period.
✍
NOTE: Sensors programmed to 24-hour functions
(Emergency, Panic, Fire) always send a Central
Station Report and always sound the local siren
regardless of the Call Limiter setting.
DIALING DELAY
◆
The factory setting will cause the communicator
to dial the Central Station instantly when an
alarm or supervisory event occurs.
◆
Alternately, the communicator can be
programmed to wait 30 seconds before dialing.
This gives the user time to disarm the system
and prevent communications in the case of a
subscriber generated false alarm.
DIALING METHOD
◆
The factory setting causes the communicator to
dial using DTMF (dual-tone multi-frequency)
tone dialing.
◆
Alternately, the communicator can be
programmed to use pulse (rotary) dialing. Use
this option if the telephone line in the installation
does not support tone dialing.
0
1
HOME
AWAY
0 FOR OFF (UNLIMITED)
1 FOR ON (5 VIOLATIONS)
PROGRAMMING STEP #101
PROGRAM
STORE PROGRAM
1
0 FOR NO DELAY
1 FOR 30 SECOND DELAY
PROGRAMMING STEP #103
PROGRAM
STORE PROGRAM
0
4
GHI
HOME
AWAY
0 FOR TONE DIALING
1 FOR PULSE DAILING
PROGRAMMING STEP #104
PROGRAM
STORE PROGRAM
1
34