Filter
Top Products
Black 0044
Black0044
IMPORTANT INFORMATION
LINEAR LIMITED WARRANTY
This Linear product is warranted against defects in material and workmanship for
twelve (12) months. The Warranty Expiration Date is labeled on the product.
This
warranty extends only to wholesale customers
who buy direct from Linear or
through Linear’s normal distribution channels.
Linear does not warrant this
product to consumers.
Consumers should inquire from their selling dealer as to
the nature of the dealer’s warranty, if any.
There are no obligations or liabilities
on the part of Linear Corporation for consequential damages arising out of
or in connection with use or performance of this product or other indirect
damages with respect to loss of property, revenue, or profit, or cost of
removal, installation, or reinstallation.
All implied warranties, including implied
warranties for merchantability and implied warranties for fitness, are valid only until
Warranty Expiration Date as labeled on the product.
This Linear Corporation
Warranty is in lieu of all other warranties express or implied.
For warranty service on Linear equipment return product, at sender’s expense to:
Linear Hong Kong
19/F Hounor Industrial Centre
6 Sun Yip Street
Chai Wan, Hong Kong
Attention: Repairs Department
REPAIRS POLICY
✶
Charges will be made for equipment that is not of warranty, shows
customer abuse, or is damaged by the effects of lightning, water, fire, or
other abnormal happenings.
✶
Customer’s equipment sent in for repair may be repaired or replaced with
new or remanufactured equipment at Linear’s discretion.
✶
The customer is always responsible for shipping and handling charges to
the repairs facility. Linear will pay return shipping and handling charges
on “in warranty” products shipped back to the customer. The customer
will be billed for the return shipping and handling charges on “out of
warranty” products.
✶
There will be a 50% expedite fee for any express requests.
✶
The International Sales Manager must be notified prior to the return of
product to Linear. All international returns must have an International
Repair Authorization number (IRA#). The number must be marked on all
packages. Failure to do so will cause delays in processing.
IMPORTANT !!!
Linear radio controls provide a reliable communications link and fill an important
need in portable wireless signaling. However, there are some limitations which
must be observed.
✶
The radios are required to comply with local rules and regulations as radio
devices. As such, they have limited transmitter power and therefore limited
range.
✶
A receiver cannot respond to more than one transmitted signal at a time
and may be blocked by radio signals that occur on or near their operating
frequencies, regardless of code settings.
✶
Changes or modifications to the device may void regulatory compliance.
✶
Infrequently used radio links should be tested regularly to protect against
undetected interference or fault.
✶
A general knowledge of radio and its vagaries should be gained prior to
acting as a wholesale distributor or dealer, and these facts should be
communicated to the ultimate users
FCC NOTICE
This equipment generates and uses radio frequency energy and if not installed
and used properly, that is, in strict accordance with the manufacturer’s
instructions, may cause interference to radio and television reception. It has been
type tested and found to comply with the limits for a Class B computing device
in accordance with Part 15 of FCC Rules, which are designed to provide
reasonable protection against such interference in a residential installation.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
✶
Relocate the Console away from the TV/radio receiver.
✶
Plug the Console into a different wall outlet so that the Console is on a
different branch circuit.
✶
Re-orient the TV/radio antenna.
✶
If necessary, the user should consult the dealer or an experienced
radio/television technician for additional suggestions.
FCC TELEPHONE RULES AND REGULATIONS
The FCC requires that this alarm dialer system not make more than 15 repetitive
dialing attempts to a single telephone number. There are no limitations when
the calls are made sequentially to two or more alternative numbers, or when
these calls are spaced 10 minutes apart to a single number. The FCC Rules
and Regulations do not specify the re-attempt period as this can vary for specific
applications. When setting this period, take into consideration local, interstate,
foreign and special network call completion characteristics, network processing
time, a sufficient number of rings and busy/don’t answer modes
.
FIRE EVACUATION PLANNING
For systems that include fire protection, the following information should be
available to the users of the system.
✶
Draw up a floor plan showing two exits for each room.
The following procedures are to be discussed with the family:
➀
Status of bedroom doors.
➁
Familiarity with alarm signals.
➂
Testing of door during a fire and use of alternate escape route if door is
hot to touch.
➃
Crawling and holding breath.
➄
Escape fast. No stopping for packing.
➅
Meet at designated outdoor spot.
➆
Emphasize that no one is to return to a burning house.
➇
Fire department notification from a neighbor’s phone.
➈
Periodic rehearsal is to be conducted.
INDUSTRY CANADA NOTICES
NOTICE
: The ringer equivalence number (REN) assigned to each terminal
device provides an indication of the maximum number of terminals allowed to
be connected to a telephone interface. The termination on an interface may
consist of any combination of devices subject only to the requirement that the
sum of the ringer equivalence numbers of all the devices does not exceed 5.
NOTICE
: The Industry Canada label identifies certified equipment. This
certification means that the equipment meets certain telecommunications
network protective, operational and safety requirements. The Department does
not guarantee the equipment will operate to the user’s satisfaction.
Before installing this equipment, users should ensure that it is permissible to be
connected to the facilities of the local telecommunications company. The
equipment must also be installed using an acceptable method of connection.
The customer should be aware that compliance with the above conditions may
not prevent degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian
maintenance facility designated by the supplier. Any repairs or alterations made
by the user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect the
equipment.
Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic water pipe
system, if present, are connected together. This precaution may be particularly
important in rural areas.
CAUTION
: Users should not attempt to make such connections themselves, but
should contact the appropriate electric inspection authority, or electrician, as
appropriate.
Copyright © 2002 Linear Corporation 217157 B