Filter
Top Products
4
Important Safety Information
RCR2596, RCR2510 and RCRM2510 Rotary Cutters 312-753M
5/09/08
Land Pride
Table of Contents
Safety Labels
YourCutter comesequipped withall safetylabels inplace. They
were designed to help you safely operate your implement.
1. Read and follow label directions.
2. Keep all safety labels clean and legible.
3. Replace all damaged or missing labels.
4. Some new equipment installed during repair require safety
labels to be affixed to the replaced component as specified
by Land Pride. When ordering new components make sure
the correct safety labels are included in the request. To
order new labels go to your Land Pride dealer.
5. Refer to this section for proper label placement.
To install new labels:
a. Clean the area the label is to be placed.
b. Spray soapy water on the surface where the label is to
be placed.
c. Peel backingfrom label. Press firmly onto thesurface.
d. Squeeze out air bubbles with the edge of a credit card.
838-062C
Amber Reflector
818-335C
Red Reflector
22288
22288
818-130C (Shown)
Caution 540 RPM
818-240C
Caution 1000 RPM
22288