Filter
Top Products
36
Section 6: Features & Benefits
RCR2596, RCR2510 and RCRM2510 Rotary Cutters 312-753M
5/09/08
Land Pride
Table of Contents
Section 6: Features & Benefits
RCR2596, RCR2510 & RCRM2510 Models
Features Benefits
Surpassed rugged
industry standards
All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing
procedures specified by ANSI.
540 or 1000 RPM Fits wider variety of tractors. (RCR2596 is 540 RPM only)
5 Year gearbox warranty Shows our confidence in the gearbox integrity.
3 Gearboxes Allows equal torque to be spread to left and right gearbox.
Gearbox HP rating 120 Horsepower on splitter gearbox and 60 HP on outboard gearboxes.
Splined rubber flex- couplers
between the center and
outboard gearboxes
Protects the driveline and gearboxes from hard objects in the blade path.
Constant Velocity U-Joint
option on RCR2510 &
RCRM2510 Pull-type
Reduces chatter and extends life of U-joint during turns.
Slip-clutch protection
on main driveline
Slip-clutch is more convenient than shear-bolt, protects gearbox against sudden impact.
3-Point or Pull-type Pull-type fits older tractors without a top link or smaller tractors without enough lift
capacity. (RCR2596 3-point: Cat. 1 & 2) (RCR2510 & RCRM2510 3-point: Cat. 2 & 3)
High productive cutting width RCR2596 cuts 8’-0” width.
RCR2510 & RCRM2510 cuts 9’-10” width.
Fully welded 10 Gauge deck Fully welded deck adds rigidity.
3/16” Sidewall thickness Protects sidewalls from thrown objects.
Obstacle free underside Underside of deck is free of reinforcement members which tend to allow material to lodge.
Round back design Allows for cleaner and efficient discharge of material, helps eliminate damage to rear
corners by not sticking out.
Chain or rubber shields Reduces flying debris.
Full length skids with
replaceable shoes
Adds reinforcement to side panels. Replaceable shoes allows for change before wearing
through to weld-on piece.
Dual leveling rods
on Pull-type
Dual leveling rods eliminate deck twisting when going over uneven terrain.
3/16” Round stump jumper Standard stump jumper aids in sliding over obstructions, which helps protect gearbox
output shaft.
1” x 4” Blade bar Heavy-duty blade bar adds support to stump jumper as well as gearbox output shaft.
Splined blade hub Splined blade hub offers tight non-slipping attachment to output shaft.
1/2” x 4” Heat-treated blades Heat-treated blades last longer than non-heat-treated blades.
1” Diameter cutting capacity Aids in cutting small brush.
High Blade tip speed RCR2596 (540 rpm) = 14,792 fpm
RCR2510 (540 rpm) = 17,749 fpm Means Cleaner Cutting of material.
RCRM2510 (1000 rpm) = 18,035 fpm
Laminated tires Laminated tires can handle almost any condition.
Airplane tires (Pull-Type only) Airplane tires offer smooth roadability.
Fits Land Pride Quick Hitch Allows for quick and easy one person hook-up.