Filter
Top Products
RB-525-B046
2. Conveyance and Handling Procedure
When transporting the instrument, make sure that the body has been securely locked.
Center the body onto the base so that their edges are aligned. Push down the lock while turning right until
both body and base are firmly fixed to each other.
3. Installation Environment
1) Do not expose the instrument's view window directly to the sunlight or bright lighting from other
sources.
2) Do not operate in places where either dust or rubbish
accumulates. Environment with extremes in heat and
humidity should also be avoided.
Always follow the environmental requirements below
for installation.
Temperature
+10 °C ~ – 40°C
Relative Humidity
30 % ~ 85 %
3) Keep away from inflammable or explosive gases as
well as storage areas housing medical supplies and
chemicals.
4) Avoid installing where dew condensation may
accumulate. Also, avoid where the radical temperature
changes may occur.
5) Keep away from sites that may experience strong
vibrations or sudden shocks.
6) Malfunction is likely to occur if the instrument is improperly stabilized or accidentally overturns.
To prevent internal/external damage caused by sudden impact, set the instrument on a solid and
secure surface. Do not store in high, 'out of reach' places.
Dust
Gases
Great care should be taken and avoid that the
examinee is exposed to strong light or glare. The
pupil will contract too much for measurement to
be carried out.