Filter
Top Products
RB-525-B0420
6.7.1 Each Item Description
The First Screen
START Selects how to start measurement. Refer to '6.8 Auto Start Function' for detail.
MANUAL:
Measurement is taken every time the measurement switch is
pressed.
AUTO 3 :
Measurement is automatically started when the measurement
requirements are met. Three measurements are continuously
taken for each eye and automatically printed out when the
measurement is over.
AUTO 5 :
Measurement is automatically started when the measurement
requirements are met. Five measurements are continuously
taken for each eye and automatically printed out when the
measurement is over.
REF Selects refractive measurement manner.
NORMAL:
One measurement when the measurement start switch is pressed
once.
QUICK :
A set number of measurements are continuously taken when the
measurement start switch is pressed once. A maximum of ten
measurements is available.
A target moves only for the first measurement for the
continuous measurement. The target does not move after the
second measurement.
STEP Selects the increment for refractive measurement.
VD(mm) Selects corneal vertex distance.
CYL Selects the sign for cylindrical value.
KERATO Selects the display unit for kerato measurement.
RADIUS : a radius of corneal curvature
DIOPT : a corneal refractive power
PRINT FORM Select printout format. Refer to '6.4 Print Out' for detail.
ALL
: prints all data. (A maximum of ten data for each eye.)
ECONO
: prints the optimal values only.
OFF
: no printouts.
PRINT OUT Selects direction of data printed out.
The setting of this item is invalid when START is set for either "AUTO 3" or " AUTO 5".
NOTE